The VIA Labs VL805 is another USB product from VIA which has been used on many other boards which offer USB 3 ability. Its is backwardly compatibility and makes use of the Universal Serial Bus 3.0 Specification as well as Intel’s eXtensible Host Controller Interface (xHCI). The USB controller offered support in Windows 8,7, Vista, and XP.
This is the driver for the Microtek USB Phantom 330CX scanner. Note that this is a very old scanner and the drivers are only for older Windows systems such as Windows XP, 2000 and also Windows Me. There are two files in the zip file and you need to click on one to see which one will recognise your operating system.
The Marvel SATA 2 controller drivers has been added below. You will note that this driver is a 32bit as well as a 64bit driver file. The Marvel controllers are still widely used and you will normally have to reboot your computer after the installation and then press F2 to open the BIOS to change the settings.
Below you will find the Sandisk Mobile Mate Reader driver. This should work on all versions of Windows including 32bit and 64bit operating systems. You need to check your version as this is driver was released in 2009. It might not work on Windows 10 so check after the download if it will recognise your Sandisk.
The LG mobile driver allows you to connect you LG phone to your computer. This allows you access to the mobile phone from LG which will also allow you access to the menu system. With this software you should also be able to backup your mobile phone to your computer. This USB driver from LG will run on Windows XP to Windows 8.1 and every system in between.
The Samsung GT S5303 from Samsung is another phone which you can connect to your USB tether cord and access the phone from your computer. You will have to install the USB driver for Samsung and will then have to access the phone from the software menu system. This is standard software for the Samsung range of mobile phones including the Samsung GT-S5303.
If you are looking for the USB driver for the Samsung GT-S7392 then you will need to install the standard USB driver from Samsung. This is a standard diver for all Samsung phones. You can download the driver file below which has been added onto this website and should work on most operating systems.
The WF2119S Netis USB driver was updated in August 2016 and this driver should work on most operating systems. Its a large file so check your driver version on your computer as this is driver version 1026.13.0625.2014 for the Netis WF2119S USB network adapter. You can also see the Netis driver located here.
Incoming Search Terms:
The Samsung ML-1915 Printer driver version 3.10.49:15 was the last driver released for this device. You can download the driver below and the driver runs on a number of operating system. You can install this driver on your computer and being the last as it was released in March 2016.
If you have a Samsung ML-2165W Printer Scanner then you can download the driver version 5.02 which has been added below for download. You can also search this website for other printer drivers from Samsung. Note that this driver will work on the Mac OS.
Incoming Search Terms:
Below you can now download the latest Samsung SCX-3405FW printer driver being version 3.13.12.02.36 which was the last driver for the printer. This was released in March 2016 and not been updated since. The driver will run on a number of operating systems from Windows XP to Windows 8.1 but not Windows 10.
This is the Samsung CLP-300 Printer Universal Print driver version 2.50.06.00:03. You can Right-click below to download the file from the Samsung website. This driver was released in December 2015 and was the last driver released for the printer. The driver is Samsung’s attempt to have one universal print driver across their spectrum of printers.