The usb\vid_10c4&pid_ea60&rev_0100 Hardware ID is for the Silicon Labs CP210x UART Bridge. Download the driver here. Note that a UART Bridge, also known as a Universal Asynchronous Receiver-Transmitter Bridge, is a hardware component for the conversion of data between UART and another protocol, such as USB or Ethernet.


In addition to the above, lets breakdown the usb\vid_10c4&pid_ea60&rev_0100 hardware ID on here. We will now see usb\vid_10c4&pid_ea60&rev_0100what the Hardware ID can tell us about what you are looking for. In addition we already know that this was made by Silicon Labs which is for the CP210x UART Bridge.

Additionally the Vendor ID (VID) 10c4 identifies the hardware vendor which we know is Silicon Labs. Again we all know that Silicon Labs made many of the hardware. The Vendor 10c4 is the Silicon Labs vendor code. In addition the Product ID (PID) pid_ea60. Likewise this identifies the product as the CP210x UART Bridge device. Note also the there is a Revision Number (REV) rev_0100. So we now know that this Hardware ID is for the Silicon Labs CP210x UART Bridge. This is from the CP210x UART Bridge products. The full installation and troubleshooting can be found under the page cp2102 usb to uart bridge controller on here.

See also  Hardware ID Updates


Hardware ID’s

Likewise see also the CSR Bluetooth driver on here. The hardware ID is usb\vid_0a12&pid_0001&rev_8891 which you will find in the INF file or when there is an error. This driver works for most of the generic Chinese bluetooth devices such as their headphones. The UART is managed by the following ID usb\vid_0403&pid_6001&rev_0600 UART. This is the driver which will work with the FT232R USB UART. This can be managed by the ft232r usb uart driver windows 10.

You can also find this on this website. The driver for the Silicon Labs CP210x UART Bridge is not the same even though both are UART ports. See the download the this below on this page. Another port ID is that of the PL2303 Serial Port which has the ID of usb\vid_067b&pid_2303&rev_0300. Again see the page for that where the driver can be downloaded and installed. Lastly there is also the Aten Bridge hardware. You will note that this is another USB to Serial Bridge port hardware. The hardware ID for this is usb\vid_0557&pid_2008&rev_0300.


Mobile Phone Hardware

Here you will find the hardware ID for the mobile phones. These include the usb\vid_04e8&pid_6860&rev_0400 which allows the USB port to function. We can see this when you connect your Samsung phone to the computer visa the USB cable. This is what is called the MTP protocol. There is also the Xperia ID which you can also find on here as the Xperia M Dual. The hardware ID is as follows – usb\vid_0fce&pid_adde&rev_0100. Lastly there is also the CSR Bluetooth hardware. You can browse this webiste for more information on this.

See also  USB\VID_0A5C&PID_6412



You can download the cp2102 driver listed below.

driver download

CP2102 USB to UART Bridge Driver – Windows (Win 7.1 +Win 8)

CP2102 to UART Bridge Driver – Windows (Windows 10)

Likewise there is also a Linux version for this hardware.

CP2102 to UART Bridge Driver – Linux


Latest CP2102 Driver:

CP210x Universal Windows Driver (Version v11.2.0 Date:  10/21/2022)

CP210x VCP Mac OSX Driver (Version v6.0.2 Date 10/27/2021)



Incoming Search Terms: