Download the CP2112 USB Bridge Driver here. This is the CP2112 single-chip HID USB to SMBus Master Bridge. The CP2112 devices offer a seamless way to incorporate USB into your applications. By eliminating the need for complicated firmware and lowering development time, they provide a quick and easy solution.
UART
CP2102N USBXpress USB Driver
Download the CP2102N USBXpress USB driver here. CP2102N devices offer a seamless solution for integrating USB into applications. Likewise streamlining development and reducing firmware complexities. These highly integrated USB-to-UART bridge controllers. This allows for easy transition from RS-232 designs to USB with minimal components and PCB space.
FT245B USB FIFO IC Drivers
You can download the FT245B USB FIFO IC drivers here. The chip is now obsolete and is not recommended for new designs. The FT245R version (usb\vid_0a12&pid_0001&rev_8891) recommended for new designs. See the other pages on here for this. The drivers however if you have this chip have also added below.
FT232B USB UART IC Driver
Download the FT232B USB UART IC Driver here however note that it is highly recommended that you use the FT232R USB UART version in any new designs. The FT232B, being the 2nd generation USB UART device from FTDI, offers enhanced features compared to its predecessor, the FT8U232AM.
FT2232D Dual USB UART/FIFO IC Driver
You can download the FT2232D Dual USB UART/FIFO IC driver here.The FT2232D, being the 3rd generation of FTDI’s popular USB UART/FIFO IC, builds upon the FT2232C and FT2232L. However, it’s important to note that the FT2232D does not belong to a new generation of devices.
FT245R USB FIFO Driver
Download the FT245R USB FIFO driver here. The FT245R. Likewise it is the latest addition to FTDI’s USB FIFO interface Integrated Circuit Devices. This introduces several notable features. Notably, it serves as a USB to parallel FIFO interface and incorporates the new FTDIChip-ID™ security dongle feature. Furthermore, it offers both asynchronous and synchronous bit bang interface modes.
FT4233HP Quad USB UART IC`s Driver
Download the FT4233HP Quad USB UART IC`s driver on here. This is a new IC which comes with power delivery. This is the FT4233HP and FT4232HP Hi-Speed Quad USB UART IC`s with integrated power delivery.
FT4232H Quad USB UART IC Driver
Download the FT4232H Quad USB UART IC driver here. The FT4232H, being FTDI’s 5th generation of USB devices, is a USB 2.0 Hi-Speed (480Mb/s) to UART IC. Notably, it offers the flexibility to be configured in various industry standard serial or parallel interfaces.
FT4222H USB to Quad SPI (I2C Bridge)
Download the FT4222H USB to Quad SPI (I2C Bridge) driver here. The FT4222H, housed in a compact 32-pin QFN package, is a versatile High/Full Speed USB2.0-to-Quad SPI/I2C device controller. To enable the internal PLL functionality, an external 12MHz crystal is required. With support for multi-voltage IO (1.8/2.5 and 3.3V), it offers flexibility in various configurations.
FT2232H Dual USB UART/FIFO IC Driver
Download the FT2232H Dual USB UART/FIFO IC driver here. The FT2232H represents FTDI’s 5th generation of USB devices, offering advanced capabilities for various interface configurations. Operating at USB 2.0 Hi-Speed (480Mb/s), this IC serves as a bridge between USB and UART/FIFO communication.
FT232H Single Channel USB UART/FIFO IC Driver
Download the FT232H Single Channel USB UART/FIFO IC driver here. Operating at a rapid USB Hi-Speed 480Mbps rate, this single-channel bridge chip delivers impressive performance. It offers the choice between a flexible serial interface or a parallel FIFO interface, enabling data transfer speeds of up to 40Mbytes/s.
FT240X Full Speed USB to 8-bit FIFO Driver
Download the FT240X Full Speed USB to 8-bit FIFO driver here. The USB2.0 Full Speed IC provides a convenient solution as a bridge to 8-bit wide FIFO interfaces. Acting as a FIFO itself, the device offers efficient operation with a maximum speed of 1 MByte/s, while consuming low power at 8mA.