Trim Windows 10

SSD driver / SSD FirmwareThis is how to use trim windows 10. If you have an SSD drive then you will need to check if the TRIM function has been set. This becomes a bit of an issue with Windows 10 as the Intel SSD 660p driver allows you to use the TRIM function on demand with its software however the Kingston SSD drive is a bit more complicated. You can set the TRIM function on Windows 10 and bypass the settings on the software than comes with the drive. You can also check if it has been set on your computer.

Trim Windows 10

The TRIM command is like a superhero move for your Solid State Drive (SSD). Picture this: your computer tells the SSD, “Hey, these data blocks are not in use anymore, feel free to clear them out.” This helps the SSD do its job better by managing storage space, speeding up reading and writing data, and making sure it lasts longer.

In simpler terms, TRIM is the command that helps your computer know exactly where the data you want to move or delete is stored on the SSD. It’s like giving directions so the SSD can find and clear only the specific blocks that hold the unnecessary data. Plus, whenever you or your computer decide to delete something, TRIM quickly wipes out the space where those files were hanging out. This means the next time you want to put new data in that spot, there’s no need to wait around for the old stuff to be deleted first. See also the ASUS TUF Drivers on here.

So, why is TRIM so important? Well, it’s the key to keeping your SSD in top-notch shape. It ensures the SSD lives up to its expected lifespan. Although the operating system usually takes care of enabling TRIM automatically, sometimes it might forget. In those cases, you can step in and give TRIM a little nudge by using specific commands.

See also  Nexus 6 USB Driver

 

Checking the TRIM function in Windows 10

  • Use the Windows key + X keyboard shortcut to open the Power User menu and select Command Prompt (Admin)

Now you will need to copy the following line into the DOS prompt

  • fsutil behavior query DisableDeleteNotify

You will now see something like this on your computer as has been listed below.

  • trim windows 10

The fsutil command in Windows 10 will show you if the TRIM function on your hard drive is enabled. If it shows = 0 as it does above then your TRIM function is enabled but if it shows = 1 then the TRIM function is not enabled. Likewise see also the CP2109 USB to UART as well as the Samsung 960 EVO SSD NVMe Driver on here.

 

How to enable TRIM on Windows 10

  • Use the Windows key + X keyboard shortcut to open the Power User menu and select Command Prompt (Admin)

Now copy the following line next to the command prompt to enable TRIM on your drive

  • fsutil behavior set DisableDeleteNotify 0

If you wish to disable TRIM then you will need to copy and paste the following next to the command prompt.

  • fsutil behavior set DisableDeleteNotify 1

This is how the TRIM function in Windows 10 is either enabled or disabled. These will work with all SSD drives from the Intel SSD drive to the lesser known drives such as the Samsung SSD drives and the SANDISK SSD driver as well as the 950 pro nvme driver. This is how trim Windows 10 works.

 

How to optimize SSD performance

Boosting your SSD’s performance is like giving it a little upgrade. Here are some easy tweaks you can make:

  1. Keep it Awake: Adjust your power plan so your SSD doesn’t take a nap. Change the setting from “Maximum power savings” to “Off” under PCI Express and Link State Power Management. This ensures your SSD is always ready to roll without any delays.
  2. Cache the Writes: Enable write caching for a speed boost. Right-click on your SSD in Disk drives, go to Properties, and head to the “Policies” tab. Make sure write caching is turned on. Don’t worry too much about data loss – it’s a rare risk, and SSDs are speedy enough to make it unlikely.
  3. Scheduled Tune-Ups: Give your SSD a regular checkup with the Defragment and Optimize utility. Unlike traditional hard drives, SSDs don’t need defragging, but they do benefit from a trim function to tidy up after file deletions.
  4. Switch on AHCI Mode: Get the most out of your SSD by making sure AHCI mode is enabled. If your SSD seems sluggish, checking and enabling AHCI can give it a speed boost.
  5. Bypass Onboard VGA: Skip the Onboard VGA if you want your SSD to perform at its best. Disable the Onboard VGA option to avoid any hiccups in performance.
  6. Sort Out Boot Order: Make sure your SSD is in the spotlight by configuring the boot order properly. The wrong sequence can slow things down, so set it up right for a smoother start.
See also  USB 3.0 Driver for Windows 7

Remember, whenever you’re tinkering with settings, play it safe and back up your data first to avoid any unexpected surprises. Likewise see also the Samsung 960 PRO SSD NVMe Driver as well as the Samsung 950 PRO SSD NVMe Driver.

 

 

 

Incoming Search Terms: