The Aztech DSL7000GRV-S Router username and password is shown here. See what the default username and password is for the router. See again what the default IP is of the router so you can login. There is no user manual for the DSL7000GRV-S router but you can see the layout of the router from the outside.
Aztech DSL7000GRV-S Router
The router you will note what the default IP as well as what the default username and password is. Below you can see that. The Singtel Aztech DSL7000GRV-S manual is also down below. See also the Aztech Router Username Password as well as the Aztech DSL600E as well as the Aztech HW550-3G and Aztech DSL7000GRV-S routers.
DSL7000GRV-S Router IP Address
Most times the default IP for this router is 192.168.1.254 (Singtel router ip) however you can also find other IP’s that may also be the IP. The Aztech range of routers also use the following login IP’s which are the
These are the defaults for all the routers in the range. You can also search this website for other login information. You can see the username and password below which comes for this specific router. These include routers such as the DSL5068EN-1T1R router as well as the Aztech DSL5018EN. There are also others on this website such as the cp2102 driver which is also on this website. You can search this website for more information.
See the default DSL7000GRV-S username and password. You can also see below how to change the IP address on the router. You can see below how this gets done. Try and use an IP that you can remember. The user manual is also down below which is the Singtel manual.
Change the IP Address on a Aztech DSL7000GRV-S router
|Login > Click on System Info > Click on Home Network Configuration > See on top it says Local Area Network (LAN) Setup > Type in your new IP address in IP Address > The better choice for an IP is 192.168.1.1 as it is common and easy to remember|
Don’t change the Subnet Mask, this should always remain at 255.255.255.0