CP2102 USB to UART Bridge

It seems you’re encountering a Code 10 error with your CP2102 USB to UART Bridge on Windows 10 Home. Despite installing the CP210x 10.1.10 driver, you’re receiving an error stating that the device cannot start. Using a USB to UART Bridge with CP2102 chipset on Windows 10 Home Version 10.0.19043 Build 19043. Installing CP210x 10.1.10 driver. VID_10C4&PID_EA60 Upon installing the device, the Add Hardware Wizard states.

CP2102 USB to UART Bridge

The Add Hardware Wizard indicates that the software for the device is installed but may not work correctly. The setupapi.dev log reveals that the device class cannot be configured, and there’s a mismatch between the selected driver node and the device, leading to a force-install situation.

Here are some ideas to resolve the issue:

1. Verify Driver Compatibility: Ensure that you have the correct driver version compatible with your CP2102 chipset and Windows 10 version. Sometimes, using an older or incompatible driver version can lead to errors. Note also that the latest software does not support the older hardware. You will need to use the last functioning software.

The Silicon Labs driver, version 10.1.9 dated 09/03/2020, is essential to note. However, earlier versions are ineffective. This driver bears similarity to the FTDI chip driver, commonly employed for radio interfaces. Nevertheless, Icom America has opted to utilize the Silicon Labs chip instead. See the download here – CP2102 USB to UART Bridge Driver. Likewise see also the CP2102 driver.

2. Uninstall and Reinstall Driver: Completely uninstall the existing driver and then reinstall it. Make sure to restart your computer after uninstalling and before reinstalling the driver. Likewise see also the CP210x USB to UART bridge VCP drivers driver on here.

See also  FT231X USB UART Driver

3. Check for Updates: Visit the manufacturer’s website to check for any updated drivers specifically designed for your Windows 10 version. Sometimes, new driver updates address compatibility issues and bugs. Likewise see also the Common Windows 10 Problems on here.

4. Try Different USB Port: Connect your CP2102 device to a different USB port on your computer. Sometimes, issues can arise due to faulty USB ports.

5. Check Device Compatibility: Ensure that your CP2102 USB to UART Bridge is compatible with Windows 10 Home Edition. Some older devices may not be fully compatible with newer operating systems.

By following these steps, you should be able to troubleshoot and resolve the Code 10 error with your CP2102 USB to UART Bridge. Lastly also see the RTL8187 Wireless Driver Windows 7 on here as well.

 

 

  • Unique Post