Visioneer OneTouch 9520 USB

USB DriverThe Visioneer OneTouch 9520 USB scanner is a photo scanner which has a built-in 35mm transparency adapter. Which scans at 48 bit color at 1200 dpi. The visioneer 9520 photo scanner driver is below. This scanner has been discontinued with many other older versions of hardware for Visioneer. See this website for more details on drivers for older hardware. The onetouch scanner software has been added below.

Visioneer OneTouch 9520 USB

With a USB 2.0 (1.1 compatible) port as well as an optical resolution of 4800 dpi which is still very good by today’s standards. Note that the Microsoft Windows 7, Vista and XP certified TWAIN and WIA drivers. This download includes Windows device driver(s) (required to operate your scanner), TWAIN, and WIA drivers (if applicable). You can also see the Visioneer Strobe 400 Driver on here.

 

Installing the Visioneer OneTouch 9520 USB  Driver

To set up your Visioneer scanner, follow these steps:

  1. Disconnect the Scanner: Start by unplugging the USB cable of the scanner from your computer.
  2. Remove Previous Software:
    • Click on the Windows icon in the bottom left corner of your screen.
    • Right-click and select “Programs and Features.”
    • Sort the programs by publisher and find “Visioneer Inc.” programs.
    • Right-click on the driver and choose uninstall, then follow the prompts until it’s completely removed.
    • Do the same for the OneTouch software.
  3. Download and Install the Latest Driver:
    • Visit the Visioneer Scanners support page.
    • Look for your scanner model and download the latest TWAIN/WIA driver.
    • Find the downloaded file in your “Downloads” folder and double-click on it.
    • The scanner driver Setup Wizard will open. Click “Next” to proceed with the installation.
  4. Install Xerox DocuShare Drive:
    • Download the latest version of Xerox DocuShare Drive and follow the provided installation instructions.
  5. Refer to the User Manual: For more detailed instructions or if you encounter any issues during the installation, consult the user manual that came with your scanner.
  6. Troubleshoot Compatibility: If you face any problems, consider troubleshooting compatibility issues. Ensure that your computer has Local Administrator credentials before you start the installation process.
See also  D-Link DU-CS Driver

By following these steps, you can successfully install and set up your Visioneer scanner. See also the MTP driver Windows 7 as well as the Visioneer 9520 photo scanner, Visioneer Onetouch 8700 usb driver.

 

Troubleshoot Compatibility Issues

To troubleshoot compatibility issues with your Visioneer OneTouch 9520 USB scanner, follow these steps:

  1. Uninstall the Program:
    • If the program is already installed, uninstall it from your computer.
  2. Troubleshoot Compatibility:
    • Right-click on the installation file.
    • Select “Troubleshoot Compatibility.”
    • Click “Try Recommended Settings” and then click “Start the Program” to begin the installation.
  3. Update Driver:
    • Locate the problematic device and model, then double-click to open the Properties dialog box.
    • Select the “Driver” tab.
    • Click the “Update Driver” button and follow the on-screen instructions.
    • After updating the driver, reboot your computer to apply the changes effectively.
  4. Consult the User Manual:
    • For more detailed instructions or specific troubleshooting steps, refer to the user manual provided with your scanner.
  5. Contact Visioneer Support (if needed):
    • If problems persist, consider reaching out to Visioneer support for further assistance.
  6. Ensure Local Administrator Credentials:
    • Make sure your computer has Local Administrator credentials before initiating any troubleshooting steps.

By following these steps, you can troubleshoot compatibility issues with your Visioneer OneTouch 9520 USB scanner effectively. Likewise the OneTouch 7300. as well as OneTouch 7100 Scanner.

 

Visioneer OneTouch 9520 Scanner

The Visioneer OneTouch 9520 is a fantastic photo scanner designed for both home and office use. It’s equipped with a built-in 35mm transparency adapter and scans photos at an impressive 48-bit color depth with a high resolution of 4800 x 9600 dpi. Plus, it features a convenient Hi-Speed USB 2.0 interface for fast and efficient connectivity to your computer.

See also  Visioneer OneTouch 6600 Scanner Driver

For more in-depth details about its features and usage, it’s best to consult the user manual. Also, please keep in mind that only the consumables and spare parts specified in the product user manual are available for purchase. Happy scanning! There is also the OneTouch 6600 scanner as well as the OneTouch 6200 Scanner as well.

 

 

driver download

Visioneer OneTouch 9520 USB (Windows 7, Vista & XP)

driver download

Visioneer OneTouch 9520 USB (Windows 2000)