Sandisk Mobile Mate Reader Driver

USB DriverBelow you will find the Sandisk Mobile Mate Reader driver. This should work on all versions of Windows including 32bit and 64bit operating systems. You need to check your version as this is driver was released in 2009. It might not work on Windows 10 so check after the download if it will recognise your Sandisk.

Sandisk Mobile Mate Reader Driver

If you have problems with the USB port then you can also check USB problems which will solve most problems you have with your USB port and driver. The driver is below so install it as the Sandisk will normally automatically install it. There would normally be a message “New Hardware Found” will appear when the driver is installed.

 

Hardware ID

Genesys Logic USB Mass Storage Device

USB\VID_05E3&PID_0702

Genesys Logic USB Mass Storage Device

USB\VID_05E3&PID_0702

Genesys Logic USB2.0 Card Reader
USB\VID_05E3&PID_0761

 

How to install the Sandisk driver

The SanDisk MobileMate USB 3.0 Card Reader should work when you plug it into your computer, but if it’s not, here’s a simple guide:

  1. Get Drivers: Go to the SanDisk website and download the drivers for your device. Look for a file with “.inf” – that’s your driver.
  2. Install Drivers: Right-click on the “.inf” file and choose ‘Install.’ Just follow the instructions that pop up. You might need your parent’s permission for this.
  3. Plug it in: Stick your SanDisk MobileMate Reader into a USB port. Your computer should notice it and set up any needed software.
  4. Check Device Manager: Go to your computer’s Device Manager and look for your device under ‘Disk drives’ or ‘Universal Serial Bus controllers.’ If you don’t see it, try installing again or using another USB port.
See also  Trim Windows 10

Don’t forget to check the user manual that came with your SanDisk product for specific instructions. Likewise see also the SanDisk Z400s Series SSD as well as the Realtek USB 3.0 Card Reader Driver Win 10.

 

How do I check if my device has the latest drivers installed?

To make sure your computer’s drivers are up-to-date, do this:

  1. Open Device Manager: Hold down the Windows key and press X, then click on Device Manager.
  2. Check Drivers: Look at the list of drivers on your computer.
  3. Update a Driver: Right-click on a driver and choose Update Driver. Pick “Search automatically for drivers.” The driver will update itself.
  4. Get Confirmation: If it says, “Your device has the best drivers already,” you’re good to go.

If you prefer, you can also check for updates through Windows Update:

  1. Check Windows Update: See if it says “Updates are available.”
  2. Dig Deeper: Click on Advanced Options, then go to Optional updates > Driver updates.

And don’t forget to restart your computer after updating to make sure everything works smoothly. Lastly also see the Sandisk MobileMate Reader Driver as well as SanDisk X300 Series SSD.

 

Sandisk Mobile Mate Reader Driver

(Click accept as Chrome blocks the file)