VIA Labs VL805 USB 3.0 Driver

USB Driver The VIA Labs VL805 or VIA USB 3.0 driver or vl805-q6 driver. This which is another USB product (vl805 driver Windows 10 version) from VIA which has been used on many other boards which offer USB 3 ability. Its is backwardly compatibility and makes use of the Universal Serial Bus 3.0 Specification as well as Intel’s eXtensible Host Controller Interface (xHCI). The USB controller offered support in Windows 8,7, Vista, and XP.

VIA Labs VL805 USB 3.0 Driver

Table of Contents

This is the VIA controller driver version 4.70C which was released in February 2016. This was at the time the last driver released as it fixed a fingerprint reader issue. The fingerprint keyboard compatibility issue has now been fixed in this release. You can download the file below as the vl805-q6 driver.

This is the latest driver from VIA. The VIA Labs VL805 USB 3.0 Controller Driver is now at driver version 4.70C. This driver fixes a number of issues when it was released in February 2016. Note the updates below as well as the operating systems.

– VIA USB 3.0 Port Driver for Windows Vista, 7, 8, 8.1: 6.1.7600. 4701
– VIA USB 3.0 Hub Driver for Windows Vista, 7, 8, 8.1: 6.1.7600. 4701
– VIA USB 3.0 UASP Client Driver 6.1.7600. 4002
– VIA USB 3.0 UASP Transfer Mode Utility 1.0.0.15

Driver Version

This is version 4.90A which was released in late 2014. You should check your hardware to ensure that this is the hardware you have in your computer. Also check the current driver version you have. When you install this driver, if you have a newer driver then the software install for the USB driver will stop and it will state that it is the latest driver. If not then it will install over the older driver on your computer. There is also a vl805 driver Windows 10 version. These include the driver cp2102 as well as the prolific usb-to-serial comm port as well. This as well as the ft232rl driver.

How do I install VIA Labs VL805 driver on Windows?

Here’s how to install the VIA Labs VL805 USB 3.0 Controller driver on Windows in simple steps:

Check the Power Cable:
- If your device card needs it, make sure the extra power cable is connected.
Download the Driver:
- Go to the VIA Driver Download Portal and get the latest driver for your VIA Labs VL805.
Unzip and Open:
- Unzip the downloaded file and go into the new folder.
Run the Setup:
- Find and double-click on the setup file in that folder.
Allow Windows:
- If Windows asks for permission, say yes to let it run the file.
Read and Agree:
- Read the EULA (End User License Agreement) and agree to start the installation.
Follow Instructions:
- Follow the steps that pop up on your screen. They’ll guide you through the installation.
Compatibility Check:
- Make sure the download matches your computer system. If you’re not sure, ask for help.
Ask for Help if Needed:
- If you run into any problems, don’t hesitate to ask for help. We want your computer experience to be smooth.

What is the latest version of VIA Labs VL805 driver?

The VIA Labs VL805 is like the brain behind USB 3.0 on your computer. It’s a single chip USB 3.0 Host controller that makes it possible for a computer with PCI Express to connect with various USB devices.

This chip is quite versatile. It allows your computer to communicate with USB devices at different speeds – Super-Speed (5 Gbps), High-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps). So, whether it’s a speedy external hard drive or a regular USB mouse, this chip handles them all.

Note that you should not confuse with the usb\vid_0403&pid_6001&rev_0600 hardware ID. See also the VIA Rhine Fast Ethernet Driver and the VIA Vinyl VT2021.