Trust 120 Spacecam

USB DriverThe Trust 120 Spacecam is also called the WB-1100G camera. Its had a bit of a name change over the years. Note however that the cam is very old and that the driver are Windows XP. If you need to run the software on an operating system which is not XP then you will have to tray and install the driver in compatibility mode.

Trust 120 Spacecam

The Trust 120 Spacecam, also known as the WB-1100G Webcam, was a versatile device with specific features and requirements:

  • Resolution: This USB webcam boasted a resolution of 352 x 288 (100k), ensuring clear visuals during video calls or recordings.
  • Frame Rate: Capable of reaching a maximum video speed of 30 frames per second, it provided smooth and seamless video streaming.
  • Sensor Type: Equipped with a CMOS sensor, it captured images and videos with clarity and precision.
  • Weight: The webcam was lightweight, weighing in at 230 grams, making it easily portable and suitable for various setups.
  • System Requirements: To operate efficiently, the system needed a Pentium 166 MHz MMX CPU, one free USB port, 32 MB of system memory, and 100 MB of free hard disk space.
  • Dimensions: The webcam’s compact size measured 68 x 85 x 84 mm, allowing it to fit into different spaces seamlessly.

In the package, users could expect to find the webcam with a USB cable attached, a camera stand for versatile placement, a multi-language user’s manual for easy setup and guidance, and a CD-ROM containing essential drivers, software, and manuals.

See also  Sony Xperia Z1 (C6902, C6903, C6906, and C6943) Drivers

However, it’s essential to note that this product is no longer available in Trust’s current assortment, indicating its discontinuation from the market.

 

How do I install Trust 120 Spacecam drivers?

There are other drivers on here as well. The Chicony USB 2.0 camera driver as well as the USB 2.0 PC camera driver as well.

Here are simplified steps to install Trust 120 Spacecam drivers on Windows 10, designed for easy understanding:

  1. Download Driver:
    • Download the Trust 120 Spacecam driver from a trusted source. Don’t rename the downloaded file to prevent installation issues.
  2. Disconnect Webcam:
    • Unplug the webcam from your computer before starting the installation.
  3. Extract Driver:
    • Double-click the downloaded driver file to extract its contents.
  4. Select Language (if prompted):
    • If asked to choose a language, select your preferred language.
  5. Follow Installation Instructions:
    • Follow the on-screen instructions provided by the installation program.
  6. Reconnect Webcam:
    • After installation, reconnect the webcam to your computer and power it on.
  7. Reboot Your Computer:
    • Finally, restart your computer to ensure the changes take effect.

Remember, these steps provide general guidelines. The actual process might vary based on your specific system setup. Always download drivers from trusted sources to avoid potential security risks. Happy video chatting!

 

How do I check if my webcam works after installation?

After installing your webcam, here’s how you can ensure it’s working properly:

  1. Open Camera App:
    • Press the Start button, type “camera,” and click on the Camera app.
  2. Check Camera View:
    • Once in the Camera app, you should immediately see the camera view if your webcam is working correctly.
  3. Test Audio and Video:
    • Click the record button (a round white button with a video camera icon), record for a few seconds, then click it again to stop recording.
  4. Review Your Recording:
    • Click the Camera Roll shortcut in the bottom-right corner of the Camera app. Play the recorded video; if both video and audio are present, your webcam is functioning properly.
  5. Troubleshoot if Needed:
    • If you don’t see a video stream, check if the camera is plugged in correctly (for wired models) and ensure no privacy shutter covers the lens.
    • If audio isn’t working, verify that the correct input device is selected in the Sound section of Windows 10’s settings.
  6. Test in Video-Chatting Apps:
    • Test your webcam in popular video-chat apps like Zoom, Google Meet, Discord, Slack, and Skype.
    • In the respective apps, check the video settings. If the webcam is functioning, you should see your video feed.
See also  Intel Android MTP USB Device Driver

By following these steps and checking your webcam in different apps, you can ensure it’s working smoothly, enabling seamless video and audio communication.

There is also the SN9C102 as well as the SN9C103 as well as the cp2102 usb to uart bridge controller driver drivers. Search this website for more information on this hardware and others in the Sonix.

 

driver download

Webcam WB-1100G

 

 

Incoming Search Terms: