This is the USB driver for the Samsung B310e. You can download the driver below as it is a very small file which is easy to install. The USB driver for the B310e is listed as a Spreadtrum Sci USB 2 Serial driver version 188.8.131.52. This was the last driver which allowed you to connect the mobile phone to your computer. It will work for most people and it is a very common mobile phone in India.
The following USB to Serial devices are all from Prolific and they all use the same USB to serial driver which you can also find on this website. Note that there are UART as well as Serial and Printer chips which they make. You will find this rather easy to understand.Search this website for more Prolific device drivers.
The PL2303TA is a USB to Serial Bridge Controller from Prolific. The chipset provides USB to straight-through RS232 serial connectivity at baud rates up to 128Kbps. This allows you to use a USB port in your computer to a RS232 type devices such as point-of-sale terminals, serial modems as well as industrial equipment.
PL2305 USB to Printer Bridge Controller driver is added below which will take you to the download page as this chipset is from Prolific. This chipset you will find in the USB-C to Parallel Printer Cable adapters. This cable is a bi-directional bridge between the Universal Serial Bus (USB) system and IEEE-1284 parallel port printers.
The PL2303HXD USB to Serial Driver is the same driver from Prolific and you can find the download and installation page listed below. You will note that this is similar to the PL2303RA chipset from Prolific which is used in the StarTech 2 Port USB to RS232 Serial DB9 Adapter Cable. This usb to serial driver is the same on all the Prolific chipsets.
The PL2303RA chipset from Prolific can be found in a number of devices. The most common location for this chipset can be found in the USB to RS232 Bridge Controller which you will find in the StarTech 2 Port USB to RS232 Serial DB9 Adapter Cable. You can find the driver for this cable listed below as the Prolific USB to serial driver on this website.
There is a pretty common error with the WD SES driver which you can find on this website. Error 28 on the WD SES device is because the driver has not been installed correctly with the WD My Passport Essential. This happens with Windows updates and you will need to uninstall the current driver as well as remove the WD USB SES device from your computer. Restart and follow the instructions below.
If your Western Digital SES device is giving you an error then you should consider following the checklist below for more assistance as this error is rather common. There is an easy fix and you can do this in under 10 minutes and not receive this error again. The errors normally occur after Windows has run an update and this most times is what is giving your the error 31 in your device manager panel. You can also find the WD SES driver on this website.
This is the setup of the HP LaserJet Pro P1108 Printer which you have and how to install the HP LaserJet Pro P1108 Printer driver file as well as how to connect your printer to the network as well as the wireless network that the HP LaserJet Pro P1108 Printer may be connected too. Search this website of more information on this printer.
The following are installation help pages as well as drivers for USB to Serial adapters. These range from the Minicom adapter as well as the Prolific adapter drivers as well as Windows and Linux instructions. Aten as well as Bafo make these adapters and you can check to see how best to use these and how to install them as well.
Below I will show you how to install the Aten USB to Serial driver in both Windows as well as in Linux. There is a Aten USB to Serial driver on this website and I have added it at the bottom again. We also cover a few of the most common error with the Aten USB to Serial Driver on this website. You also check the install for the Minicom usb to rs232 driver as well as the Tripplite usb to rs232 driver as well as the usb to rs232 driver.