BiPAC USB 741GEv2 ADSL

USB DriverThe BiPAC USB 741GEv2 ADSL was a very popular ADSL device which has been sold globally. There are two types of this version. This is for a Billion 741GE v2 which has a USB port at the rear of the device. The drivers for this has been added below.

BiPAC USB 741GEv2 ADSL

The driver should work on most operating systems today. The other popular ADSL device is the Billion BiPAC 7000 which looks almost similar. See the driver listed below. There are a number of other driver here such as the Billionton Bluetooth PCMCIA as well as the Bluetooth 2.0 EDR Driver which is also another Billiton brand.

When you install the BiPAC USB 741GEv2 ADSL driver. You will need to download the file and extract its contents. When this is done then click on the install button. The driver will now install. If it does not install as the driver is older than say a Windows 10 operating system. Then go into the 64 bit directory and look for the INF files. Now right-click on the INF file and the driver will install. Windows will popup and say that it found new hardware. This normally allows you to install it on any OS.

The Billion BIPAC-741 GE V2.0 is an ADSL Firewall Router equipped with a 4-port 10/100M switch. It offers high-speed Internet browsing through its high-speed ADSL port, supporting downstream rates of up to 8Mbps and upstream rates of up to 1024Kbps.

See also  Chicony USB 2.0 Camera Driver

Additionally, this router features rate management, allowing users to choose Internet speeds that match their requirements and budget. It adheres to the MultiMode standard, including ANSI T1.413, Issue 2, G.dmt (G.992.1), and G.lite (G.992.2). It supports both Annex A and B, catering to different H/W platforms. See also the Samsung 950 PRO SSD NVMe Driver as well as the UMAX usc 5800 Scanner Driver.

 

How do I configure the router?

Configuring the Billion BIPAC-741 GE V2.0 router involves a series of steps. Here’s a general guide to help you get started:

  1. Access the Router’s Web Interface:
    • Open a web browser and enter the router’s IP address (usually 192.168.1.254) in the address bar.
    • Enter the default username and password (often admin/admin) when prompted.
  2. Set Up Your Internet Connection:
    • Go to the WAN settings page and input the details provided by your Internet Service Provider (ISP). This includes connection type (e.g., PPPoE), username, and password.
  3. Configure Your Wireless Network:
    • If your router supports Wi-Fi, navigate to the wireless settings page.
    • Set up your wireless network by choosing a network name (SSID) and a strong password.
  4. Set Up Security Features:
    • Access the security settings page and enable features like firewall and DoS protection to enhance your network security.
  5. Save and Reboot:
    • Save the settings you’ve configured.
    • Reboot the router to apply the changes.

 

Hardware ID

These are the hardware ID for this software.

D-Link VVB Ethernet port
VVBUS\ETHERNET
D-Link VVB RFC1483 encapsulated ATM port
VVBUS\RFC1483
D-Link DSL-302G ADSL Modem
VVBUS\GATEWAY

This is the Virata VVB Ethernet port are you will note.

See also  D-Link DU-CS Driver

Please keep in mind that these steps are general and might vary based on your specific router model. For detailed and precise instructions, it’s advisable to consult the user manual or quick start guide available online for your router model. :olewise see also the BiPAC 7000 USB ADSL2+ Router Series and Aztech DSL5018EN-1T1R Router.

The other option is to take the install file and right click on it and then click on “compatibility mode”. Then Windows 10 or Windows 11 will then show you which OS you want to install it from. You have the choose of Windows 2000 or Windows XP and Windows 10 will then install the driver for you as if the driver is running on the older system. This is the easiest to complete if you don’t know much about computers. See also the Western Digital SES if you are interested in the wd ses device usb device on this website. This as well as their error 28 as well as the error 31 code.

 

driver download

BiPAC USB 741GEv2